QNAP TDS-h2489FU-4314-1TB Dual Processor
QNAP TDS-h2489FU-4314-1TB Dual Processor
Featuring dual Intel® Xeon® Silver 4300 processors and 24 U.2 NVMe Gen 4 x4 SSD bays, the QNAP’s flagship NVMe all-flash storage TDS-h2489FU delivers high random read/write IOPS for tackling I/O-intensive and latency-sensitive applications. The ZFS-based QuTS hero operating system supports inline data deduplication and compression for reducing I/O and SSD storage consumption, which significantly extends SSD lifespan with a higher price-performance ratio for all-flash storage arrays. Coupled with near-unlimited snapshots, real-time SnapSync, and QSAL (QNAP SSD Antiwear Leveling), the TDS-h2489FU meets your requirements for modern data centers, virtualization, and mission-critical backup/restore tasks.
Product Description
Product Description
TDS-h2489FU-4314-1TB (By Request)
| CPU | 2 x Intel® Xeon® Silver 4314 16-core/32-thread processor, up to 3.4 GHz |
| CPU Architecture | 64-bit x86 |
| Encryption Engine | (AES-NI) |
| System Memory | 1 TB RDIMM DDR4 ECC (32 x 32 GB) |
| Memory Slot | 32 x RDIMM DDR4 ECC (16 x slots per socket) |
| Flash Memory | 5GB (Dual boot OS protection) |
| Drive Bay | 24 x 2.5-inch
The system is shipped without SSD. |
| Drive Compatibility | 2.5-inch bays: 2.5-inch SATA hard disk drives (#17-24) 2.5-inch SATA solid state drives (#17-24) 2.5-inch U.2 NVMe PCIe Gen4 x4 solid state drives |
| Hot-swappable | |
| M.2 Slot | 2 Slot 1: M.2 2280 NVMe PCIe Gen 3 x4 or SATA 6Gb/s Slot 2: M.2 2280 NVMe PCIe Gen 3 x2 or SATA 6Gb/s |
| SSD Cache Acceleration Support | |
| SR-IOV | |
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 4 (2.5G/1G/100M/10M) |
| 25 Gigabit Ethernet Port | 2 x 25GbE SFP28 SmartNIC port |
| Wake on LAN (WOL) |
Only the 2.5GbE port
|
| Jumbo Frame | |
| PCIe Slot | 2 Slot 1: PCIe Gen4 x16 Slot 2: PCIe Gen4 x8 *Slot 2 is preinstalled with a 25GbE network adapter.
**Slot 1 provides the width of PCIe Gen4 x16 when Slot 2 is not in use, and provides the width of PCIe Gen4 x8 when Slot 2 is in use. |
| USB 3.2 Gen 1 port | 4 |
| Form Factor | Rackmount |
| LED Indicators | SSD, Status, Power, Fan, Temperaure, Power Module Status, Device Name, IP Address |
| Buttons | Power, Reset, OLED |
| Dimensions (HxWxD) | 88.3 × 446.2 × 713.2 mm |
| Weight (Net) | 21.31 kg |
| Weight (Gross) | 27.6 kg |
| Operating Temperature | 0 – 35°C (32°F – 95°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 1200W PSU(x2), 100-240Vac Max Wattage: 1200W@200-240Vac 1000W@100-127Vac |
| Power Consumption: Operating Mode, Typical | 467.59 W
Tested with drives fully populated.
|
| Fan | 6 x 60mm, 12VDC |
| System Warning | Buzzer |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 10,000 |
Software Specifications
| Operating System | QuTS hero h5.0.0 |
| Supported Client Operating Systems |
|
| Supported Browsers |
|
| Supported Languages | Chinese (Traditional & Simplified), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (Brazil), Romanian, Russian, Spanish, Swedish, Thai, and Turkish |
| Storage Pool | |
| SED Storage Pool | |
| Maximum Pool size | 1024 TB |
| Maximum number of storage pool | 128 |
| Shared Folder Type | Thick, Thin |
| Maximum shared folder size | 1024 TB |
| Maximum number of shared folder | 256 |
| JBOD Expansion | |
| VJBOD / VJBOD Cloud | |
| iSCSI Service | |
| Fibre Channel Service | |
| LUN Type | Thick, Thin |
| Block-based iSCSI LUN | |
| Maximum LUN size | 1024 TB |
| Maximum number of targets LUN | 256 |
| RAID Type | Single, RAID 0, 1, 5, 6, 10, 50, 60, Triple Mirror, Triple Parity |
| RAID Group |
To ensure data security, system stability, and storage performance, the maximum number of drives for a single RAID group is now 16 (applicable to RAID 5, RAID 6, RAID TP, and subgroups of RAID 50 and RAID 60). Nevertheless, users can combine multiple RAID groups into a large storage pool that contains more than 16 drives, using RAID 50, RAID 60, or RAID 10 as the RAID configuration. This enhancement will only be applied to new RAID groups. All existing RAID groups and storage systems will not be affected. |
| RAID Expansion (by replacing bigger Disks) | |
| Storage Pool Expansion (by adding RAID Group) | |
| RAID Hot Spare | Global, Local |
| RAID Sync/Rebuild/Scrubbing | |
| End-to-End data integrity | |
| Silent error detection and self-healing | |
| Internal drive | ZFS |
| External drive | EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT |
| Disk, Enclosure Locate | |
| Disk S.M.A.R.T. Scan | |
| Disk S.M.A.R.T. Data Migration | |
| Ironwolf Health Management | |
| Secure Erase | |
| SSD Trim | |
| SSD Life Estimation | |
| Disk Roaming | |
| Disk Standby | |
| Shared Folder Snapshot | |
| LUN Snapshot | |
| Minimum Snapshot Interval | 1 minute |
| Snapshot Retention Policy | |
| Self-serve Snapshot Recovery | |
| Application Consisted Snapshot | |
| Snapshot Full Clone | |
| Snapshot Instant Clone | |
| Snapshot Replica / Vault | |
| SSD read-only Cache | |
| SSD read & write log cache | |
| SSD dedicated ZIL cache | |
| SSD Cache RAID | 0, 1, 10 (journal) |
| External Device Management | |
| Mount Smart Phone (MTP) | |
| External RAID Device (QNAP so on) Management (External Device Mode) | |
| External RAID Device (QNAP so on) Management (NAS Mode) | |
| File Server |
|
| FTP Server |
|
| Maximum FTP connection | 1024 |
| Shared Folder Data Compression | |
| Shared Folder Data Deduplication | |
| Shared Folder WORM | |
| File Station (Web) | |
| Object Storage | |
| Local user account | 16,000 |
| Local group account | 512 |
| Domain user/group account | 200,000 |
| Domain Security | |
| Domain Controller | |
| Shared folder permission | |
| Windows ACL | |
| User quota | |
| Group quota | |
| Folder quota | |
| Home folder | |
| Resource Monitor | |
| SNMP | V2, V3 |
| Network recycle bin |
|
| System Log & Notification Center | Log recording: 3,000 event per hour |
| Smart Fan | |
| Schedule on/off | |
| Internet protocol | IPv4, IPv6 |
| Virtual Switch | |
| Port trunking | , (7 modes) |
| VLAN | |
| DHCP Server | |
| DDNS (Dynamic Domain Name Service) | |
| Network access protection with auto-blocking | SSH, Telnet, HTTP(S), FTP, CIFS/SMB, and AFP |
| Security Counselor | |
| Malware Remover | |
| AES 256-bit Folder Encryption validated by FIPS 140-2 CAVP | |
| 2-step verification | |
| Allow/Deny List | |
| Access Protection | |
| Service binding | |
| Firewall | |
| Windows Server certifcated | |
| Citrix Ready | |
| vSphere Web Client Plug-in | |
| VMware vSphere VAAI for iSCSI | |
| VMware vSphere VAAI for NAS | |
| Windows ODX | |
| Windows/VMware Snapshot Agent | |
| HTTP/HTTPS Connections | TLS 1.0/1.1/1.2/1.3 |
| Supports WebDAV Connection | |
| Supports Virtual Hosts | 32 |
| Qsync |
Note: At least 1 GB RAM is required. |
| [Qsync] Management Mode | User customization, Central |
| [Qsync] Qsync client supported platforms | Windows, macOS, Ubuntu, Android, and iOS |
| [Qsync] Maximum number of version control | 64 |
| HybridMount |
Note: At least 1 GB RAM is required. |
| [HybridMount] File Cloud Gateway | Concurrent Connections = 80 Upload & 80 Download |
| [HybridMount] Network Drive Mount | |
| [HybridMount] Free cloud gateway sessions | 2 |
| HBS (Hybrid Backup Sync) |
Note: At least 1 GB RAM is required. |
| [HBS (Hybrid Backup Sync)] NAS to NAS backup | |
| [HBS (Hybrid Backup Sync)] Cloud Backup | |
| [HBS (Hybrid Backup Sync)] Cloud Sync | |
| [HBS (Hybrid Backup Sync)] 2-way and Active Sync | |
| [HBS (Hybrid Backup Sync)] Backup Deduplication | |
| [HBS (Hybrid Backup Sync)] Apple Time Machine Backup | |
| [HBS (Hybrid Backup Sync)] External drive backup | |
| [HBS (Hybrid Backup Sync)] Maximum number of backup job | 400 |
| Hyper Data Protector | |
| Boxafe |
Note: At least 1 GB RAM is required. |
| [Boxafe] Office 365 Backup | |
| [Boxafe] Google Workspace Backup | |
| [Boxafe] Full-text search | |
| Qsirch |
Note: This feature is supported by all QNAP NAS devices with at least 2 GB of memory |
| [Qsirch] Previews | Photos, music, videos, PDFs, Gmail, and others |
| [Qsirch] Integrate Mac Finder | |
| [Qsirch] Advanced picture search | |
| [Qsirch] Search filters | |
| QuMagie |
Note: At least 1 GB RAM is required. |
| [QuMagie] Browse photos | |
| [QuMagie] Virtual and smart albums | |
| [QuMagie] AI-assisted photo management | People, things, places, and others |
| Antivirus (free) | |
| McAfee (License) | |
| QVPN Service |
Note: At least 1 GB RAM is required. |
| [QVPN Service] Remote Access | PPTP, L2TP/IPSec, OpenVPN, QBelt (QNAP proprietary) |
| [QVPN Service] Supportedd utility and mobile app | Windows, macOS, iOS, and Android |
| [QVPN Service] Supported maximum clients | 100 |
| LDAP Server | |
| RADIUS | |
| SQL server | |
| License Center | |
| Multimedia Console | |
| Photo Station | |
| Music Station | |
| Video Station | |
| Download Station | |
| Notes Station | |
| Qfiling | |
| Media Streaming add-on | |
| QmailAgent | |
| QuWAN | |
| DA Driver Analyzer | |
| Q’center |
Note: The application is available in the App Center and in virtual appliance marketplaces (VMware vSphere ESXi and Microsoft Hyper-V). |
| Q’center Server | |
| Q’center Agent | |
| Connect to Q’center | |
| Virtualization Station |
Note: At least 4 GB RAM is required. |
| [Virtualization Station] Supports Virtual machine instances | Windows, Linux, Unix, and Android |
| [Virtualization Station] VM importing, exporting, cloning, snapshot capturing, backup, and restoration | All function is Fine. |
| [Virtualization Station] Virtual switches | Can create a virtual switch |
| [Virtualization Station] GPU pass-through | GPU function is fine |
| [Virtualization Station] Suggested number of virtual machine instances | 32
The actual number of virtual machine instances may vary by the memory installed on NAS (e.g. 1 VM= 1 thread for 1 vCPU and 1GB memory). Please expend memory if needed. |
| Container Station |
Note: At least 1 GB RAM is required. |
| [Container Station] Supported type | LXC/LXD and Docker
Note: LXD has been supported after Container Station 2.4 |
| [Container Station] Docker Hub Registry | |
| [Container Station] Container importing and exporting | |
| [Container Station] Console mode | |
| Linux Station |
Notification: At least 4 GB RAM is required. |
| [Linux Station] Supports Ubuntu versions | 16.04, 18.04, and 20.04 |
| Linux Station Center | |
| QVR Elite |
Note: At least 1 GB RAM is required. The maximum number of channels supported varies by NAS model, network configuration, and camera settings. |
| [QVR Elite] Recording Technique | Standard MP4 file based |
| [QVR Elite] License Type | Subscription-based |
| [QVR Elite] User-defined trigger events | |
| [QVR Elite] QVR Pro Client (Desktop) | Windows, macOS, and QNAP HybridDesk Station |
| [QVR Elite] QVR Pro Client (Mobile) | Android and iOS |
| [QVR Elite] Recording camera streams | H.264 |
| [QVR Elite] Free built-in camera channels | 2 |
| [QVR Elite] Expandable camera channels | Developing |
| [QVR Pro Client] Live 4K H.265 (6M) channel Number @ 8 x 1080P H.264 recording channls (Use HybridDesktop Platform) (Expected) | N/A |
| [QVR Pro Client] Live 1080P H.264 (5M) channel Number @ 8 x 1080P H.264 recording channls (Use HybridDesktop Platform) (Expected) | N/A |
| [QVR Pro Client] Live 720P (3M) H.264 channel Number @ 8 x 1080P H.264 recording channls (Use HybridDesktop Platform) (Expected) | N/A |
| QVR Center |
Note: At least 4 GB RAM is required. |
| [QVR Center] Log management | |
| [QVR Center] Central monitoring across multiple servers |
